Further Thick Copper-Zinc Mineralisation at Oonagalabi
Released
Released
Announcement PDF
5th February 2026
Further Thick Copper–Zinc Mineralisation at Oonagalabi
Litchfield Minerals Limited (“Litchfield” or “the Company”) (ASX:LMS) is pleased to report strong copper and zinc assay
results from Phase 2 RC drilling at the Oonagalabi Project, with drilling confirming thick, continuous copper–zinc
mineralisation, including multiple high-grade internal zones, reinforcing the scale and robustness of the system. The
hole intersected a broad, stacked mineralised package from near surface, confirming both lateral and vertical continuity
of mineralisation within the Oonagalabi Main Zone.
Highlights
• Combined OGRC017 intercept of 128m @ 0.60% Cu, 1.00% Zn, 4.00 g/t Ag, from 23m including:
o 29m @ 0.89% Cu, 2.14% Zn, 6.7 g/t Ag from 23m
o 26m @ 0.41% Cu, 0.95% Zn, 3.8 g/t Ag from 71m
o 30m @ 0.37% Cu, 0.77% Zn, 2.7 g/t Ag from 126m
o 22m @ 0.78% Cu, 0.46% Zn, 4.3 g/t Ag from 175m
o 21m @ 0.52% Cu, 0.88% Zn, 2.0 g/t Ag from 210m
OGRC017 also returned a broader interval of zinc & when calculated separately, equates to 161m @ 0.50% Cu, 1.00%
Zn,from 23m.
• Combined OGRC16 intercept of 91m @ 0.60% Cu & 1.00% Zn from 23m Including:
o 27m @ 0.55% Cu, 1.33% Zn, 5.3 g/t Ag, from 23m
o 39m @ 0.81% Cu, 1.09% Zn, 5.8 g/t Ag, from 75m
o 25m @ 0.31% Cu, 0.53% Zn, 1.4 g/t Ag, from 122m
• Best Intercepts from OGRC015
o 8m @ 0.27% Cu, 1.30% Zn, 3.2 g/t Ag, from 4m
o 7m @ 0.25% Zn, 0.17% Cu, 2.3 g/t Ag from 85m
o 13m @ 0.20% Zn, 0.14% Cu from 101m
• Best Intercept from OGRC019 – VT2
o 34m @ 0.17% Cu and 0.78% Zn from 190m
Managing Directors Comment
“Theseresults fromOonagalabireinforceourconvictionthatwe are dealing withalarge,robustcopper–zinc systemwith
genuinescale. Intercepts suchas 161 metres ofcontinuous mineralisationfromnearsurface,containing multiplehigher-
grade internal zones, demonstrate both the thickness and continuity of the system and further de-risk Oonagalabi from
a geological perspective.
What is particularly important is the broad mineralised envelopes hosting stacked, higher-grade zones. This style is
exactly what we would expect in a large polymetallic system and gives us multiple pathways to grow both scale and
grade as drilling progresses. Importantly, mineralisation at the Oonagalabi Main zone remains open along strike and
down-dip, with large areas still completely untested.
*Intercepts calculated with a maximum 2m internal dilution and a0.1% Cu cut-off.
At VT2, drilling has confirmed a large, blind sulphide system coincident with strong VTEM and DHEM conductors. While
copper and zinc grades encountered to date are below the levels ultimately targeted, the presence of widespread
sulphides carrying base-metal tenor represents a critical technical milestone. In many intrusive-related and structurally
controlled systems, iron-rich sulphide assemblages form broad halos surrounding higher-grade feeder zones, and we
interpret VT2 as likely representing this halo position within a larger mineralised system.
We need to shift our focus decisively to vectoring, using deeper seeking geophysics, chargeability trends, structural
interpretation and targeted step-out drilling to locate the feeder zones and structural traps where higher-grade
mineralisation is most likely to concentrate. We are now moving from our original thesis of proving a blind mineralised
system exists, to unlocking where it upgrades.
With diamond drilling underway, Phase 3 RC drilling planned to start in mid- to late-February, and multiple high-priority
targets still undrilled across the broader Oonagalabi trend, and BHP’s technical input we believe the Company is
exceptionally well positioned to continue delivering meaningful news flow and to in a better position to build a copper–
zinc system of real significance across the year.”
Geological Interpretation
The distribution of grades within OGRC017 & OGRC016— with high-grade cores developed inside broad mineralised
envelopes, is considered significant.
Importantly:
• Mineralisation remains open down-dip and along strike.
• Multiple zones suggest repetition or stacking of mineralised horizons.
Growth Potential
Based on these results, the Company will soon target:
• Diamond drilling to test the strong magnetic anomaly within the Oonagalabi main zone.
• Step-out drilling to the Northeast.
• Chasing the System to the Southwest.
• Down-dip extensions across the site; and
OGRC017 & OGRC016 have increased confidence that Oonagalabi hosts a large, continuous copper–zinc system,
capable of delivering both scale and grade (Figures 1 &2, Appendices 1 & 2).
Figure1 – Map view looking east showing theOonagalabi Main Zone,including all drill holes completed to date, with reported Phase2 assay
results displayed. The relevant data is tabulated in Appendices 1 & 2.
Figure 2 – Schematic geological cross section of OGRC0017 (looking southeast) showing the Cu-Zn mineralised intercepts hosted within the
Oonagalabi Formation.
Litchfield’s Drilling Strategy
The drilling program assessing the Oonagalabi Main Zone has been, and continues to be, systematically designed to
define the lateral and vertical extent of the thick, stacked mineralised package recognised to date. The last phase and
next phase of drilling is deliberately focused on identifying the boundaries and limits of the broader mineralised
envelope, rather than targeting isolated high-grade zones early in the program. As such we are still trying to step out
100m minimum from every hole, in order to find these boundaries of the outer margins (Figure 3).
Once the outer margins of these thick copper–zinc zones are constrained, the drilling strategy will progressively work
back toward the centre of the system, where geological interpretation suggests increased sulphide intensity and higher-
grade mineralisation are most likely to develop.
This approach is intended to first establish scale and continuity, followed by grade optimisation to ensure the system is
better understood.
Importantly, mineralisation remains open along strike, with multiple priority targets identified approximately 500m to
thenortheast and 1km to thesouthwest ofthe currentdrilling. Theseareas exhibitfavourable geological characteristics
and have not yet been tested by drilling, representing clear opportunities to expand the known mineralised footprint of
the Oonagalabi system.
Figure 3 – Areas to the Northeast and Southwest which arecurrently open and undrilled.
VT2 Discussion – OGRC019
VT2 has now been tested with two drill holes, confirming a large blind sulphide system coincident with the VTEM and
DHEM conductor. Drilling intersected disseminated through to semi-massive and locally massive sulphides over
meaningful widths of up to ~30m, validating the geophysical response and confirming the presence of a preserved
sulphide body at depth.
The sulphide assemblage is dominated by pyrrhotite, with associated sphalerite and chalcopyrite returning zinc values
of up to ~7% and copper values of up to ~1.2%. This mineral mix is consistent with a mineralised polymetallic system,
where sulphide volume and connectivity drive the EM response, rather than metal grade alone.
Importantly, in many intrusive-related and structurally controlled polymetallic systems, metal distribution is strongly
zoned. Iron-rich sulphides such as pyrrhotite commonly form broader halos that surround feeder zones, while higher-
grade copper and zinc mineralisation is often concentrated into more discrete structural traps or up-temperature zones
closer to the core of the system. The intercepts to date are interpreted to represent the sulphide halo to the wider
system. Deeper seeking geophysics along with BHP’s technical guidance will further unlock this system.
Theconfirmation of ablind, preservedsulphide systemis a criticaltechnical milestone. Whilegrades intersectedto date
at VT2 are below the Company’s ultimate target, the presence of widespread sulphides carrying base-metal tenor
demonstrates that the mineral system is active and fertile. Ongoing work at VT2 will focus on two key objectives, firstly,
testing IP anomalies proximal to the EM conductors; and secondly, vectoring toward potential feeder structures and
potential higher-grade accumulation zones through the integration of downhole EM, chargeability trends, structural
interpretation and targeted step-out drilling.
Exploration update
The current diamond drilling program is currently averaging approximately 25m per shift, in line with expectations for
the existing ground conditions. The Company is planning to mobilise an RC rig for the Phase 3 drilling program (Figure
4) in mid- to late-February pending rig availability, targeting the VT1 high-conductance (3,000 siemens) conductor1
, VT2
chargeability anomalies identified from IP surveying2
, step-out drilling on the VT2 conductor and extensions to the
Oonagalabi Main Zone toward the northeast.
The Company’s exploration strategy for the year is two-fold. Firstly, to complete deep-seeking geophysics to assess the
broader, deeper mineral system, and secondly, to continue advancing the Oonagalabi Main Zone, which represents a
near-term opportunity with established continuity and thickness.
Following receipt and interpretation of additional Induced Polarisation data, exploration focus will progressively expand
into the southern portion of the system. This work is planned to be undertaken as part of the Phase 4 drilling program,
which is currently anticipated to commence around April 2026.
Figure 4 – Planned RC holes within thecurrent drilling program (shown in whiteand black) to beundertaken during the middleof February
1
ASXAnnouncement–12/01/2026 –EM Defines 3000-Siemens Conductor & 1kmCarbonate Unit - VT1.
2
ASXAnnouncement–24/11/2025- NewIP Data Highlights Multiple High-PriorityTargets
Cautionary Statement
This announcement contains forward-looking statements that involve known and unknown risks, uncertainties,
and other factors that may cause actual results, performance, or achievements to differ materially from those
expressed or implied. Such statements include but are not limited to, interpretations of geophysical data, planned
exploration activities, and potential mineralisation outcomes. Visual estimates of mineral abundance and pXRF
results should never be considered a proxy or substitute for laboratory analyses where concentrations of grades
are the factors of principal economic interest. Visual estimates also potentially provide no information regarding
impurities or deleterious physical properties relevant to valuation. Forward-looking statements are based on
Litchfield Minerals Limited’s current expectations, beliefs, and assumptions, which are subject to change in light of
new information, future events, and market conditions. While the Company believes that such expectations and
assumptions are reasonable, they are inherently subject to business, geological, regulatory, and operational risks.
Further work, including drilling, is required to determine the economic significance of any anomalies identified.
Investors should not place undue reliance on forward-looking statements. Litchfield Minerals Limited disclaims
anyobligationto updateor reviseanyforward-looking statements to reflect events orcircumstances afterthe date
of this announcement, except as required by law.
AboutLitchfield Minerals
Litchfield Minerals is a critical mineral explorer, primarily searching for base metals and uranium out of the
Northern Territory of Australia. Our mission is to be a pioneering copper exploration company committed to
delivering cost-effective, innovative and sustainable exploration solutions. We aim to unlock the full potential of
copper and other mineral resources while minimising environmental impact, ensuring the longevity and
affordability of this essentialmetalforfuture generations. Weare dedicated to involving cutting-edgetechnology,
responsible practices and stakeholder collaboration drives us to continuously redefine the industry standards and
deliver value to our investors, communities and the world.
CompetentPerson’s Statement
The information in this announcement relates to Exploration Results and is based on, and fairly represents,
information and supporting documentation compiled by Mr Russell Dow (MSc, BSc Hons Geology), a Competent
Personwhois aMemberoftheAustralianInstituteofMiningandMetallurgy(AUSIMM)andis afull-timeemployee
of Litchfield Minerals Limited. Mr Dow has sufficient sampling experience that is relevant to the style of
mineralisation and types of deposits under consideration and to the activity being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves” (JORC Code). Mr Dow consents to the inclusion in the Public Report of the
matters based on their information in the form and context in which it appears. With regard to the Company’s
ASX Announcements referenced in the above Announcement, the Company is not aware of any new information
or data that materially affects the information included in the Announcements.
Theannouncement has been approvedbytheBoardof
Directors. For further information please contact:
MatthewPustahya
Managing Director
Matthew@litchfieldminerals.com.au
Followuson:
www.litchfieldminerals.com.au
https://twitter.com/Litchfield_LMS
https://www.linkedin.com/company/litchfield-minerals-limited/
Appendix 1. LitchfieldPhase 1 and 2 RC drillhole collar information
Hole_ID East North RL Coord_Ref Depth Dip Azi_TN Azi_Mag
OGRC001 485069 7442172 814 GDA94_Zone53 200 -60 150.55 144.55
OGRC002 485143 7442333 805 GDA94_Zone53 250 -56 149.09 143.09
OGRC003 485351 7442314 820 GDA94_Zone53 300 -56 314.19 308.19
OGRC004 485402 7442483 852 GDA94_Zone53 300 -70 151.44 145.44
OGRC005 485552 7442532 849 GDA94_Zone53 300 -80 148.63 142.63
OGRC006 485513 7442440 836 GDA94_Zone53 300 -61 151.48 145.48
OGRC007 485055 7441984 816 GDA94_Zone53 96 -60 148 142
OGRC008 485066 7442174 812 GDA94_Zone53 198 -80 328 322
OGRC009 486450 7443058 833 GDA94_Zone53 278 -60 148 142
OGRC010 485397 7442475 846 GDA94_Zone53 282 -60 221 215
OGRC011 487143 7442126 860 GDA94_Zone53 348 -50 148 142
OGRC012 482716 7438867 787 GDA94_Zone53 174 -80 180 174
OGRC013 486573 7443226 814 GDA94_Zone53 244 -60 148 142
OGRC014 485541 7442524 845 GDA94_Zone53 288 -50 240 234
OGRC015 485141 7442232 811 GDA94_Zone53 300 -50 44 38
OGRC016 485239 7442293 816 GDA94_Zone53 300 -55 44 38
OGRC017 485502 7442443 846 GDA94_Zone53 300 -70 294 288
OGRC018 486453 7443455 828 GDA94_Zone53 300 -55 328 322
OGRC019 487192 7442074 861 GDA94_Zone53 304 -57 155 149
Appendix 2. OGRC017 assay results (alldatain ppm).
Hole_# From To ID Cu Zn Pb Ag Au Hole_# From To ID Cu Zn Pb Ag Au
OGRC017 0 1 A0301 1040 1100 86 0.6 0.005 OGRC017 43 44 A0344 18000 39400 333 9 0.06
OGRC017 1 2 A0302 66 80 4 <0.2 0.005 OGRC017 44 45 A0345 10300 32100 416 5.4 0.06
OGRC017 2 3 A0303 62 84 4 <0.2 0.005 OGRC017 45 46 A0346 9590 58400 439 5.6 0.04
OGRC017 3 4 A0304 124 190 5 <0.2 0.005 OGRC017 46 47 A0347 12400 31600 399 7.2 0.06
OGRC017 4 5 A0305 90 148 4 <0.2 0.005 OGRC017 47 48 A0348 5770 14500 713 4 0.04
OGRC017 5 6 A0306 90 162 4 <0.2 0.005 OGRC017 48 49 A0349 4800 8970 920 4 0.04
OGRC017 6 7 A0307 100 128 7 <0.2 0.005 OGRC017 49 50 A0350 9060 9330 946 6.2 0.03
OGRC017 7 8 A0308 104 126 7 <0.2 0.005 OGRC017 50 51 A0351 9690 11800 1430 7.6 0.05
OGRC017 8 9 A0309 76 186 5 <0.2 0.005 OGRC017 51 52 A0352 2070 17500 472 2.2 0.02
OGRC017 9 10 A0310 172 262 18 <0.2 0.005 OGRC017 52 53 A0353 988 6720 462 1.4 0.005
OGRC017 10 11 A0311 80 144 7 <0.2 0.005 OGRC017 53 54 A0354 300 2790 138 0.4 0.005
OGRC017 11 12 A0312 48 66 3 <0.2 0.005 OGRC017 54 55 A0355 458 932 191 0.4 0.005
OGRC017 12 13 A0313 56 102 3 <0.2 0.005 OGRC017 55 56 A0356 1900 42800 281 1.6 0.005
OGRC017 13 14 A0314 124 98 4 <0.2 0.005 OGRC017 56 57 A0357 2800 43500 264 2 0.01
OGRC017 14 15 A0315 58 64 3 <0.2 0.005 OGRC017 57 58 A0358 1790 9960 332 0.6 0.005
OGRC017 15 16 A0316 70 104 11 <0.2 0.005 OGRC017 58 59 A0359 1010 6340 248 0.4 0.005
OGRC017 16 17 A0317 106 150 21 <0.2 0.005 OGRC017 59 60 A0360 476 3370 91 0.4 0.005
OGRC017 17 18 A0318 48 118 5 <0.2 0.005 OGRC017 60 61 A0361 320 3800 47 0.4 0.005
OGRC017 18 19 A0319 72 82 5 <0.2 0.005 OGRC017 61 62 A0362 210 1310 33 <0.2 0.005
OGRC017 19 20 A0320 48 56 6 <0.2 0.005 OGRC017 62 63 A0363 176 854 39 <0.2 0.005
OGRC017 20 21 A0321 58 72 6 <0.2 0.005 OGRC017 63 64 A0364 188 830 35 <0.2 0.005
OGRC017 21 22 A0322 148 298 10 <0.2 0.005 OGRC017 64 65 A0365 210 674 25 <0.2 0.005
OGRC017 22 23 A0323 708 514 90 0.6 0.03 OGRC017 65 66 A0366 238 1450 78 <0.2 0.01
OGRC017 23 24 A0324 2210 1230 334 3.6 0.15 OGRC017 66 67 A0367 914 1550 912 5.6 0.06
OGRC017 24 25 A0325 2310 1640 186 1.8 0.08 OGRC017 67 68 A0368 186 418 57 0.4 0.01
OGRC017 25 26 A0326 3870 2100 53 1 0.04 OGRC017 68 69 A0369 124 234 39 <0.2 0.02
OGRC017 26 27 A0327 3280 2070 107 1.4 0.04 OGRC017 69 70 A0370 100 214 64 <0.2 0.02
OGRC017 27 28 A0328 5500 4400 253 2.2 0.06 OGRC017 70 71 A0371 108 264 60 <0.2 0.005
OGRC017 28 29 A0329 5430 6750 1060 4.8 0.07 OGRC017 71 72 A0372 1820 5530 458 1.6 0.02
OGRC017 29 30 A0330 5570 34600 919 4.6 0.05 OGRC017 72 73 A0373 2680 4660 320 2 0.03
OGRC017 30 31 A0331 10300 17900 6580 20 0.25 OGRC017 73 74 A0374 3820 4680 749 3.6 0.04
OGRC017 31 32 A0332 4460 25700 3820 10 0.11 OGRC017 74 75 A0375 3750 11800 938 3.2 0.03
OGRC017 32 33 A0333 6820 15700 3650 10.2 0.1 OGRC017 75 76 A0376 2400 21500 2230 3.8 0.03
OGRC017 33 34 A0334 5110 15500 1740 6.8 0.08 OGRC017 76 77 A0377 3450 28000 1500 4 0.04
OGRC017 34 35 A0335 5410 16700 4760 14.6 0.15 OGRC017 77 78 A0378 4090 24100 8400 14.6 0.06
OGRC017 35 36 A0336 5730 44200 1600 6.6 0.07 OGRC017 78 79 A0379 2710 28900 1130 3 0.03
OGRC017 36 37 A0337 5050 27300 1260 5.4 0.07 OGRC017 79 80 A0380 7890 22400 4650 12 0.06
OGRC017 37 38 A0338 3990 37200 1030 4.2 0.06 OGRC017 80 81 A0381 7400 13700 2190 9.2 0.06
OGRC017 38 39 A0339 3940 36900 1310 4.4 0.05 OGRC017 81 82 A0382 4020 12200 2180 7.4 0.03
OGRC017 39 40 A0340 15900 24300 1150 8.8 0.08 OGRC017 82 83 A0383 700 1510 230 0.8 0.005
OGRC017 40 41 A0341 28900 35000 186 11 0.07 OGRC017 83 84 A0384 1350 8650 599 1.8 0.01
OGRC017 41 42 A0342 37800 19700 125 13.2 0.06 OGRC017 84 85 A0385 1040 5910 421 1 0.005
OGRC017 42 43 A0343 17000 29700 333 8.6 0.07 OGRC017 85 86 A0386 7060 9530 598 4 0.04
Hole_# From To Sample_ID Cu Zn Pb Ag Au Hole_# From To Sample_ID Cu Zn Pb Ag Au
OGRC017 86 87 A0387 4560 5080 359 2.2 0.03 OGRC017 129 130 A0430 5650 12500 423 2.6 0.02
OGRC017 87 88 A0388 2700 3220 349 1.4 0.02 OGRC017 130 131 A0431 10300 33600 1250 4 0.04
OGRC017 88 89 A0389 6060 3740 967 4.8 0.06 OGRC017 131 132 A0432 10500 15200 522 4.2 0.03
OGRC017 89 90 A0390 5740 3290 589 3.2 0.03 OGRC017 132 133 A0433 7020 4990 219 2.8 0.02
OGRC017 90 91 A0391 7520 4260 399 3.2 0.03 OGRC017 133 134 A0434 5540 4900 255 2.6 0.02
OGRC017 91 92 A0392 2200 1530 149 0.8 0.005 OGRC017 134 135 A0435 2810 3130 377 1.4 0.02
OGRC017 92 93 A0393 8990 4470 138 2.8 0.01 OGRC017 135 136 A0436 5430 3810 525 2.8 0.005
OGRC017 93 94 A0394 4860 5240 157 1.8 0.005 OGRC017 136 137 A0437 2490 3070 1140 2.2 0.02
OGRC017 94 95 A0395 6470 5800 170 2.6 0.01 OGRC017 137 138 A0438 6060 3340 1180 3.8 0.03
OGRC017 95 96 A0396 3850 5090 626 2.8 0.005 OGRC017 138 139 A0439 1820 3140 918 1.4 0.005
OGRC017 96 97 A0397 1930 3170 216 1.2 0.005 OGRC017 139 140 A0440 1570 1110 336 0.8 0.005
OGRC017 97 98 A0398 452 470 33 <0.2 0.005 OGRC017 140 141 A0441 952 596 92 0.4 0.005
OGRC017 98 99 A0399 74 138 51 <0.2 0.005 OGRC017 141 142 A0442 1230 1780 394 0.8 0.005
OGRC017 99 100 A0400 72 126 25 <0.2 0.005 OGRC017 142 143 A0443 906 1910 902 1.4 0.005
OGRC017 100 101 A0401 64 140 12 <0.2 0.005 OGRC017 143 144 A0444 1700 2820 1130 2 0.01
OGRC017 101 102 A0402 82 178 12 <0.2 0.005 OGRC017 144 145 A0445 1730 9860 1370 1.2 0.02
OGRC017 102 103 A0403 716 868 85 0.4 0.005 OGRC017 145 146 A0446 1100 17400 3480 3.6 0.03
OGRC017 103 104 A0404 464 316 38 <0.2 0.005 OGRC017 146 147 A0447 892 12400 5140 3 0.02
OGRC017 104 105 A0405 92 176 9 <0.2 0.005 OGRC017 147 148 A0448 664 16200 3020 2.6 0.01
OGRC017 105 106 A0406 70 160 8 <0.2 0.01 OGRC017 148 149 A0449 5230 5110 467 3.8 0.03
OGRC017 106 107 A0407 66 160 8 <0.2 0.005 OGRC017 149 150 A0450 7090 2600 661 4.8 0.04
OGRC017 107 108 A0408 92 204 13 <0.2 0.005 OGRC017 150 151 A0451 2610 1910 1350 2.6 0.01
OGRC017 108 109 A0409 290 254 13 <0.2 0.005 OGRC017 151 152 A0452 5060 6520 381 4.2 0.03
OGRC017 109 110 A0410 116 264 9 <0.2 0.005 OGRC017 152 153 A0453 4860 14400 693 8.4 0.03
OGRC017 110 111 A0411 580 208 7 <0.2 0.005 OGRC017 153 154 A0454 7550 13000 265 5.4 0.04
OGRC017 111 112 A0412 74 110 8 <0.2 0.005 OGRC017 154 155 A0455 4930 7340 205 3.4 0.02
OGRC017 112 113 A0413 62 112 9 <0.2 0.01 OGRC017 155 156 A0456 1630 3360 135 1.4 0.005
OGRC017 113 114 A0414 718 1020 33 <0.2 0.005 OGRC017 156 157 A0457 524 2540 546 0.6 0.005
OGRC017 114 115 A0415 2670 4200 32 1 0.01 OGRC017 157 158 A0458 112 278 50 <0.2 0.01
OGRC017 115 116 A0416 418 538 35 <0.2 0.005 OGRC017 158 159 A0459 104 272 34 <0.2 0.005
OGRC017 116 117 A0417 386 394 64 <0.2 0.005 OGRC017 159 160 A0460 124 212 53 <0.2 0.01
OGRC017 117 118 A0418 874 4720 202 0.8 0.005 OGRC017 160 161 A0461 98 332 60 0.4 0.02
OGRC017 118 119 A0419 8730 9100 1690 5.8 0.04 OGRC017 161 162 A0462 96 198 53 <0.2 0.02
OGRC017 119 120 A0420 4150 11500 2680 5 0.03 OGRC017 162 163 A0463 44 192 45 <0.2 0.005
OGRC017 120 121 A0421 2050 21600 2150 4.2 0.03 OGRC017 163 164 A0464 26 78 10 <0.2 0.005
OGRC017 121 122 A0422 794 6510 1070 1.6 0.01 OGRC017 164 165 A0465 24 84 13 <0.2 0.005
OGRC017 122 123 A0423 310 2180 395 <0.2 0.01 OGRC017 165 166 A0466 24 86 17 <0.2 0.005
OGRC017 123 124 A0424 232 2710 174 <0.2 0.01 OGRC017 166 167 A0467 26 86 15 <0.2 0.005
OGRC017 124 125 A0425 840 3900 666 1.4 0.01 OGRC017 167 168 A0468 68 130 38 <0.2 0.005
OGRC017 125 126 A0426 908 4070 498 0.8 0.01 OGRC017 168 169 A0469 126 170 36 <0.2 0.005
OGRC017 126 127 A0427 1930 21200 482 1 0.02 OGRC017 169 170 A0470 134 264 47 <0.2 0.005
OGRC017 127 128 A0428 2680 1600 286 1 0.03 OGRC017 170 171 A0471 146 182 63 <0.2 0.005
OGRC017 128 129 A0429 1310 3080 437 1.4 0.02 OGRC017 171 172 A0472 126 184 71 <0.2 0.005
Hole_# From To Sample_ID Cu Zn Pb Ag Au Hole_# From To Sample_ID Cu Zn Pb Ag Au
OGRC017 172 173 A0473 134 208 58 <0.2 0.005 OGRC017 215 216 A0516 2590 19400 635 2.2 0.08
OGRC017 173 174 A0474 118 208 50 <0.2 0.005 OGRC017 216 217 A0517 10700 20200 761 5.4 0.14
OGRC017 174 175 A0475 118 290 107 <0.2 0.005 OGRC017 217 218 A0518 15300 9790 449 5.6 0.18
OGRC017 175 176 A0476 10300 7700 447 6.8 0.07 OGRC017 218 219 A0519 3030 2250 303 1.4 0.05
OGRC017 176 177 A0477 9920 4550 575 5 0.08 OGRC017 219 220 A0520 4260 3120 245 1.8 0.05
OGRC017 177 178 A0478 5350 2970 1550 5.6 0.05 OGRC017 220 221 A0521 3080 3260 623 1.8 0.04
OGRC017 178 179 A0479 10800 25100 1080 9.2 0.09 OGRC017 221 222 A0522 1360 9350 450 0.8 0.02
OGRC017 179 180 A0480 15300 11200 1100 11 0.13 OGRC017 222 223 A0523 6660 20400 1810 3.2 0.04
OGRC017 180 181 A0481 3510 3510 2030 6.6 0.12 OGRC017 223 224 A0524 10500 8070 287 2.4 0.04
OGRC017 181 182 A0482 2070 3120 598 2.4 0.05 OGRC017 224 225 A0525 7580 5140 311 1.8 0.03
OGRC017 182 183 A0483 1490 1380 126 1 0.02 OGRC017 225 226 A0526 6050 3330 356 1.6 0.02
OGRC017 183 184 A0484 498 464 85 0.4 0.005 OGRC017 226 227 A0527 1560 2080 66 0.4 0.005
OGRC017 184 185 A0485 430 332 60 0.4 0.005 OGRC017 227 228 A0528 4140 3730 319 1 0.03
OGRC017 185 186 A0486 2810 1180 155 1.8 0.03 OGRC017 228 229 A0529 1240 2650 112 0.8 0.02
OGRC017 186 187 A0487 2010 1900 67 1 0.01 OGRC017 229 230 A0530 3600 2600 126 1 0.05
OGRC017 187 188 A0488 5720 3140 67 2 0.02 OGRC017 230 231 A0531 2190 1710 99 0.4 0.08
OGRC017 188 189 A0489 6160 3010 80 2.8 0.06 OGRC017 231 232 A0532 354 1190 30 <0.2 0.03
OGRC017 189 190 A0490 1920 1200 52 0.8 0.02 OGRC017 232 233 A0533 188 1830 23 <0.2 0.005
OGRC017 190 191 A0491 14800 4610 142 6 0.09 OGRC017 233 234 A0534 166 2160 8 <0.2 0.02
OGRC017 191 192 A0492 4930 3080 1230 5.4 0.57 OGRC017 234 235 A0535 3590 2150 39 0.4 0.08
OGRC017 192 193 A0493 27200 6680 121 9.6 0.28 OGRC017 235 236 A0536 2470 2530 35 0.4 0.06
OGRC017 193 194 A0494 21400 6400 166 8.4 0.18 OGRC017 236 237 A0537 1560 2710 45 0.4 0.03
OGRC017 194 195 A0495 9680 3910 75 3 0.08 OGRC017 237 238 A0538 1200 1810 9 <0.2 0.005
OGRC017 195 196 A0496 11000 4950 122 3.8 0.1 OGRC017 238 239 A0539 286 1730 392 0.6 0.005
OGRC017 196 197 A0497 5670 1910 157 1.8 0.05 OGRC017 239 240 A0540 158 424 42 <0.2 0.005
OGRC017 197 198 A0498 720 278 32 0.4 0.02 OGRC017 240 241 A0541 148 414 38 <0.2 0.02
OGRC017 198 199 A0499 1220 590 62 0.6 0.01 OGRC017 241 242 A0542 132 388 30 <0.2 0.01
OGRC017 199 200 A0500 292 184 27 <0.2 0.005 OGRC017 242 243 A0543 96 252 24 <0.2 0.01
OGRC017 200 201 A0501 402 276 50 <0.2 0.02 OGRC017 243 244 A0544 110 278 27 <0.2 0.01
OGRC017 201 202 A0502 396 220 45 0.4 0.005 OGRC017 244 245 A0545 128 302 34 <0.2 0.01
OGRC017 202 203 A0503 288 220 55 0.4 0.005 OGRC017 245 246 A0546 82 278 28 <0.2 0.005
OGRC017 203 204 A0504 242 200 146 0.4 0.005 OGRC017 246 247 A0547 148 356 25 <0.2 0.005
OGRC017 204 205 A0505 240 190 92 0.4 0.02 OGRC017 247 248 A0548 122 342 31 <0.2 0.04
OGRC017 205 206 A0506 300 298 105 0.4 0.005 OGRC017 248 249 A0549 168 404 33 <0.2 0.01
OGRC017 206 207 A0507 270 274 101 0.4 0.005 OGRC017 249 250 A0550 144 372 42 <0.2 0.01
OGRC017 207 208 A0508 252 202 79 0.4 0.005
OGRC017 208 209 A0509 64 190 22 <0.2 0.005
OGRC017 209 210 A0510 622 2080 117 <0.2 0.005
OGRC017 210 211 A0511 2530 9560 343 1.2 0.01
OGRC017 211 212 A0512 5480 15000 248 1.8 0.04
OGRC017 212 213 A0513 6780 16700 500 2.8 0.08
OGRC017 213 214 A0514 6630 14800 374 2.6 0.06
OGRC017 214 215 A0515 5770 13200 862 3.2 0.11
JORC Code, 2012 Edition – Table 1 report
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling
(e.g. cut channels, random
chips, or specific specialised
industry standard
measurementtoolsappropriate
to the minerals under
investigation, such as down
hole gamma sondes, or
handheld XRFinstruments, etc).
These examples should not be
taken as limiting the broad
meaning of sampling.
• Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used.
• Aspects of thedetermination of
mineralisation that are
Material to thePublic Report.
• In cases where ‘industry
standard’ work has been done
this would be relatively simple
(e.g.‘reversecirculation drilling
wasusedto obtain1 msamples
from which 3 kg was pulverised
toproducea30 gchargeforfire
assay’). In other cases more
explanation may be required,
such as where there is coarse
goldthathas inherentsampling
problems. Unusual
commodities or mineralisation
types (e.g. submarine nodules)
may warrant disclosure of
detailed information.
RC Drilling
• Reverse Circulation (RC) was used to obtain samples collected in a large
green bag(for abulksample) and asmaller calico1msplit sample for each
metre drilled.
• Chip samples were collected using a sieve for each metre drilled and
retained in a plastic chip tray that were used to complete geological
logging and mineralisation visual estimates.
• A portable XRF instrument (Olympus Vanta) was used to assess Cu and Zn
levels in green bags for each metre drilled.
• Reported intercepts calculated using a0.1% Cu cut-off with maximum 4m
internal dilution.
• All samples that exceeded either 0.1% Cu or 0.1% Zn were selected for
individual 1m samples.
• 4m composite samples were collected for all intervals that did not exceed
0.1% Cu or 0.1% Zn.
• Spear samplingwas used to collect 4m composite samples.
• QAQC standards (blank,reference and duplicate) were included routinely,
alternatingevery 25 samples.
• All samples have been dispatched to Bureau Veritas in Adelaide for
conventional multi-element and fire assay analysis (see Quality of Assay
Datasection below for further details).
Drilling
techniques
• Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic,etc) and details (e.g.core
diameter, triple or standard
tube, depth of diamond tails,
face-sampling bit or other type,
• All holes were completed using the RC drilling technique by GeoDrill and
Stark Drilling using a5.5’’face sampling bit.
• All holes were surveyed during drilling using a GyroMaster north-seeking
gyro tool.
Criteria JORC Code explanation Commentary
whether core is oriented and if
so,by what method, etc).
Drill sample
recovery
• Method of recording and
assessing core and chip sample
recoveries and results assessed.
• Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
• Whether a relationship exists
between sample recovery and
gradeand whether samplebias
may have occurred due to
preferential loss/gain of
fine/coarsematerial.
• RC sample recoveries were visually estimated for each metre with poor or
wet samples recorded in drill and sample log sheets. The sample cyclone
was routinely cleaned at the end of each 6m rod and when deemed
necessary.
• No relationship has been determined between sample recoveries and
grade and there is insufficient datato determine if there is a sample bias.
Logging • Whether coreand chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and
metallurgical studies.
• Whether logging is qualitative
or quantitative in nature. Core
(or costean, channel, etc)
photography.
• The total length and
percentage of the relevant
intersections logged.
• Geological logging of RC drill holes was done on avisual basis with logging
including lithology, alteration, mineralisation, structure, weathering,
oxidation,magnetic susceptibility etc.
• Loggingof RC drill samples is qualitative and base
Share your feedback
Discover